Home >Lifting & moving
PRODUCTS & SERVICES

1/36     (1 to 20 of 719)

14 November 2017

The robust nature of Profi TI series air hoists from J D Neuhaus (JDN) makes them suitable for a range of general industrial applications.

[Read More]


09 November 2017

Contact Attachments has supplied one of its most popular forklift attachments to a specialist maintenance firm, to assist with lifting and handling duties. 

[Read More]


14 November 2017

Certex has designed a bespoke solution for handling the latest large-scale wind turbine towers.

[Read More]


31 October 2017

A Banbury based company has been fined after a 64-year old worker who was struck by a falling pallet had to have part of his leg amputated.

[Read More]


09 November 2017

Over the last two years, a staggering 4.5 million working days were lost to workplace injuries.

[Read More]


14 November 2017

Güdel’s gantry robot systems have been installed with Bridgestone, Michelin, Goodyear, Continental and Pirelli to manipulate, transport, sort and palletise product says Güdel UK’s Will Bourn.

[Read More]


19 October 2017

The attempt to lift concrete panels weighing 11 tonnes went wrong and the worker was thrown from a MEWP and then crushed by a panel.

[Read More]


15 November 2017

The Blickle SoftMotion is designed to ensure operational comfort and safety.

[Read More]


11 October 2017

Previous successful use of Stertil Koni vehicle lifts was a crucial factor when Abellio decided to opt for four sets of wireless mobile column lifts to support operations at one of its newly-extended bus workshops.

[Read More]


11 October 2017

Many mid-size crane manufacturers bank on complete hoist drive technology solutions from ABM Greiffenberger.

[Read More]


11 October 2017

Tecmach supplied a series of scissor lift tables which have indexing turntables to improve efficiency and safer manual handling in a manufacturing facility.

[Read More]


12 October 2017

Since August, eight new machines have reinforced CSX Intermodal Terminals (CSXIT) existing fleet of 16 Konecranes machines, and in December 2017 another three machines will be delivered to CSXIT.

[Read More]


10 October 2017

Modulift has launched a combined lifting and spreader beam utilising a clamp system that provides a safe, fast and adjustable beam, enabling users to lift from multiple points top and bottom.

[Read More]


05 October 2017

Kalmar's new Rail Mounted Gantry Crane offers more flexibility for intermodal and container terminals.

[Read More]


02 October 2017

Konecranes has simplified the overhead crane specification process with the introduction of its online tool, Crane Advisor.

[Read More]


02 October 2017

Electric models from SHS Handling described as heavy lifting and environmentally friendly.

[Read More]


29 September 2017

The recent Hyster Europe Big Solutions Showcase 2017 highlighted how Hyster helps different industries overcome the challenges of 6 to 16 tonne loads.

[Read More]


25 September 2017

A transport company in Mansfield has geared up for the growth of the home delivery sector having invested more than £26,000 in a new fleet of electric pump trucks.

[Read More]


11 September 2017

J D Neuhaus (JDN) hoist and crane material handling solutions deliver optimum performance and claim to offer the best Total Cost of Ownership (TCO) in its class.

[Read More]


22 August 2017

The Duggan Steel Group operates from three factories in Ireland and handles well in excess of 50,000 tonnes of various steel products every year, supplying steel construction components to the agricultural and industrial sectors.

[Read More]


1/36     (1 to 20 of 719)

FEATURES

1/11     (1 to 20 of 201)

31 October 2017

Dematic, a leading global supplier of integrated automated technology, software and services to optimise the supply chain, announced the next step in the integration of Egemin Automation and NDC Automation with Dematic by consolidating the brands into a single global Dematic brand.

[Read More]


27 October 2017

Hyster forklift trucks help manufacturer overcome tough conditions - large quantities of dust, and extreme temperatures - at its sand-lime brick production plant.

[Read More]


20 October 2017

The Combi-CBE 4t forklift was launched by Managing Director Martin McVicar at the recent GIS show at the Piacenza Expo centre in Italy.

[Read More]


19 October 2017

Demag Cranes & Components has added a new model to its DCM-Pro Manulift range to accommodate increased load capacities.

[Read More]


11 October 2017

Kalmar, part of Cargotec, has launched a new range of fully electric forklift trucks in the 9-18 ton range.

[Read More]


06 October 2017

The hoists will be used to back up the firm’s seven overhead cranes and two semi-gantry cranes.

[Read More]


19 September 2017

Hyster Europe has revealed more details about its zero-emission, high-capacity, electric trucks, announcing that a 48-tonne capacity Hyster laden container handling truck powered by electric motors is being developed.

[Read More]


 border=
12 September 2017

In 2015, collection and recycling in Europe increased by almost one million tonnes of paper in just 5 years. As the industry continues to grow, Hyster Europe claims that it can help even the most intensive paper recycling operations reduce cost and maximise efficiency. 

[Read More]


12 September 2017

Kalmar, part of Cargotec, continues its long-term cooperation with DP World Australia, the country's largest stevedore, with orders of 38 new machines for its new logistics arm, DP World Logistics Australia.

[Read More]


07 September 2017

The new empty container handler from Hyster Europe provides double handling capabilities for any empty container type, even for 2 reefers with the refrigeration units on the same side.

[Read More]


25 August 2017

Rushlift serves Buildbase with Doosan forklifts and fast service back-up.

[Read More]


17 August 2017

Frank Kho, VP Offering Development at Kalmar questions the common understanding of the role of the port terminal.

[Read More]


23 August 2017

Hyundai Construction Equipment has launched its latest all-round heavy-duty diesel forklift – the 160D-9L. The new truck fills the gap between the 160D-9 and 180D-9 and is said to offer increased load capacity, extra safety, cost-effectiveness and operator comfort.

[Read More]


11 September 2017

As Port of Tilbury underwent significant expansion, it turned to Briggs Equipment for asset management expertise.

[Read More]


04 July 2017

Take a look at the future and you find our what is important now - eCommerce, concerns about finite warehouse space, Brexit, automation and robots et al - the following Special Report give managers an insight into the challenges that are here now and on the horizon, with some ideas as to how you may plan for them.

[Read More]


04 July 2017

Street Crane has partnered with Hayward Tyler to supply and install six new overhead cranes for its newly extended production facility.

[Read More]


12 July 2017

The first of three cranes featuring Verlinde Eurobloc VT electric-hoist technology has been installed in the busy press at BMW Group´s Mini plant in Swindon.

[Read More]


09 June 2017

Street Crane has completed its second installation for JDR, supplying a high-specification 25-tonne double girder goliath crane at the company’s Hartlepool manufacturing facility.

[Read More]


08 June 2017

Avery Weigh-Tronix has unveiled the Uptime Select range of service cover packages for weighing equipment, offering 99% operational uptime and all-inclusive service cover.

[Read More]


12 June 2017

Productivity is key to a profitable materials handling operation but Cooper Specialised Handling says the best results are achieved not only by deploying the right equipment for the application, but also by specifying attachments designed to speed up the process.

[Read More]


1/11     (1 to 20 of 201)

SPONSORED CONTENT

1/4     (1 to 15 of 55)

10 June 2013

The economic solution to an ergonomic problem

[Read More]


23 September 2013

For industrial protection in any environment

[Read More]


06 February 2013

The 2-DLR is a fork attachment double drum handler suitable for lifting 1 or 2 drums at a time, the unique Grab-O-Matic gripping heads will grab all steel open top and tight head drums, plastic ’L’ ring drums and most fibre drums, damaged drums and drums of various sizes and diameters can be safely grabbed with the Grab-O-Matic 2-DLR....

[Read More]


09 January 2014

Lifting Points for Bolting – Ultimate Safety in Lifting with the RUD PowerPoint Star RUD offer an extensive range of lifting and lashing applications which includes both welded and threaded types, covering a working load capacity range from 0.6 to 200 tonne. Offering over 270 different tested and certified lifting/lashing points, 210 of which are for bolting and 60 for welding.

[Read More]


13 May 2016

MiniTec build a bespoke test room for Magnetic Shields Ltd Aluminium profile systems from MiniTec – the art of simplicity

[Read More]


12 June 2014

The Stannah Levelmaster is a low rise platform goods lift with a carrying capacity up to 2000kg. Supplied in its own self-supporting structure, it is quick and easy to install. The Levelmaster is an ideal solution where goods need to be moved over a small change in level. It offers a cost-effective, simple solution with a wide range of platform sizes.

[Read More]


13 September 2013

For all-round edge protection at height

[Read More]


12 June 2014

Stannah Microlift is Europe's largest selling range of service lifts and everyone’s answer to moving goods - from improving service in an eatery to moving cash in a casino.

[Read More]


11 May 2016

RTITB Material Handling Equipment Training can be purchased from our network of RTITB accredited providers, and can be delivered in the provider’s training centre or on an employer’s premises.

[Read More]


13 May 2016

MiniTec purpose built trolleys help a turbo shaft manufacturer improve operational efficiency

[Read More]


08 May 2013

Rack Armour rack protection aims in the first instance to avoid impact from occurring.

[Read More]


11 May 2016

Assist is RTITB’s online shop. As with everything we do, our training materials and safety products are designed to support high quality training and contribute to keeping people safe.

[Read More]


13 May 2016

MiniTec – design your own aluminium profile application with iCAD online

[Read More]


13 September 2013

For easy loading of goods and safe bridging access

[Read More]


30 June 2015

Leading names in the design, manufacture and distribution of window and door hardware, locks and reinforcements are Fab&Fix, ERA and EWS, all of which are part of Grouphomesafe.

[Read More]


1/4     (1 to 15 of 55)

VIDEO OF THE MONTH
HSD Guide 2015/2016