Floor work boosts safety for Sony DADC
June 1st 2008 Concrete Grinding has
upgraded racking aisles in
Sony DADC's NDC at Enfield,
to allow more efficient and
safer use of VNA man-up
trucks in the building.
Sony DADC uses threewheel,
wire-guided man-up
trucks to pick orders for
packaged media from the
12m high racking. The
flatness and general
condition of the six 60m
long aisles required the
speed at which the trucks
could travel to be reduced to
prevent them disengaging
from the guidance wire and
making contact with
racking.
Following a profileograph
survey, steel expansion
joints that had failed were
removed and replaced with
high-strength epoxy mortar.
The LaserGrinder ground the
width of each aisle to DM2
specification, in some areas
removing 15mm of material
despite the presence of
exceptionally hard flint. More articles from Concrete Grinding Ltd: | 
