Pro-Dek Storage Systems, Racking to furnish worktops

hsssearch.com

Click to visit http://www.toyota-forklifts.co.uk/EN/resources/Pages/default.aspx

Coming up in H&SS February: Counterbalance Trucks; Heavy Duty Lifting & Moving; The Cold Store; Warehouse Flooring; Pallets & Pallet Handling; Bespoke Structures


	What next? Request further Information visit web site Send to friend Pro-Dek Storage Systems company's profile

Click to visit http://www.windsorkomatsu.co.uk

HSDGuide.com

Racking to furnish worktops
December 1st 2008

A major cantilever racking installation providing 4500 linear metres of storage has been completed by Pro-Dek Storage Systems for manufacturer of kitchen, bedroom and bathroom furniture, Symphony Group.

The racking has been designed specifically to store a large range of worktop blanks and is located beside a machining area where they are cut and finished. Racking columns are 10,500mm high and have nine or ten arm levels per side, depending on their position within the factory.

Column spacings have been designed to accommodate three and four metre worktops, and arms are generally 1325mm long in order to store a variety of board depths.

Protective rubber pads on the columns between arm levels and radius-profiled arm ends minimise damage to boards during handling by fork trucks.

More articles from Pro-Dek Storage Systems:

Racking optimises worktop storage (1st May 2011)

A racking installation specially designed to maximise storage capacity while minimising space requirements has been completed by Pro-Dek Storage Systems for PWS Worksurfaces, a major manufacturer of kitchen and commerci

From Products

Versatile storage (1st March 2010)

Specially designed racking from Pro-Dek Storage Systems has provided an economical, versatile solution for storing a wide variety of canoes and rowing boats, some of which are 60ft long, in a new boathouse at Trentham L

From Products

Quick product access (1st October 2009)

Custom-built cantilever racking from Pro-Dek Storage Systems has enabled Ancon Special Alloy Steels to consolidate all stock under one roof and increase the safety and speed of materials handling procedures at its headq

From Products

Three into one does go (1st September 2009)

Custom-built racking from Pro-Dek Storage Systems is proving a spacesaving solution for storing salvaged and abandoned vehicles at a fouracre site operated by Brantwood Auto Recycling in north London.

From Products

Protection from the weather (1st October 2008)

Pro-Dek Storage Systems has completed two external racking installations with integral weather protection for Boys and Boden, a firm of builders merchants operating in Powys and Shropshire.

From Products

Latest racking system's a pro (1st December 2007)

Pallet and cantilever racking systems designed and installed by Pro-Dek Storage Systems have provided Yorkshire Stainless with highdensity storage facilities at a new warehouse in Rotherham. The 1100m2 warehouse was n

From Products

Extended capacity without building (1st August 2007)

External cantilever racking with weather protection installed by Pro-Dek Storage Systems has provided additional cost-effective storage capacity without building work for specialist materials stockholder Righton. Alto

From Products

Weather-proof racking boost storage for less (1st April 2007)

External cantilever racking installed by Pro-Dek Storage Systems is providing additional cost effective storage capacity without building work for specialist materials stockholder, Righton.

With roofs and tarpaulin curtains,

From Products

Space efficiency maximised (1st August 2006)

A new racking installation completed by Pro-Dek Storage Systems has increased storage volumes and picking efficiency at a 5000m2 warehouse operated by plastic building products distributor, Plaslyne.

From Storing containers

Stock holding capacity doubled (1st February 2006)

Specialist metals and industrial plastics supplier, Righton, has doubled stockholding capacity at its West Yorkshire service centre with the installation of custombuilt racking from Pro-Dek Storage Systems.

From Storing containers

High cap racking (1st August 2005)

Pro-Dek�s cantilever and A-frame racking is providing flexible, highdensity storage for a wide range of sheet and extrusions at Richard Austin Alloys� new Coventry DC.

From Storing containers

Speed and efficiency in seven days (1st February 2005)

Window profile manufacturer Fersina Systems has boosted speed and efficiency at its national distribution centre in South Yorkshire with cantilever racking from Pro-Dek Storage Systems.

From Storing containers

Stock volumes maximised (1st April 2004)

Narrow aisle cantilever racking from Pro-Dek Storage Systems, specially designed to take account of a wide variety of panel products, has enabled timber distributor, Silverman, to maximise stock volumes in a new distribution centre.

From Storing containers