Trolley transport re-thought for more agile driving
01 March 2019
Linde’s Trolley Supply Truck is a new vehicle concept from Linde Material Handling that combines the features of Linde logistics train with a forklift truck.
The design is based on Linde’s matrix concept: both the goods transporter’s control unit and drive unit come from the modular system for Linde warehouse equipment. What is new, however, is the load unit which takes the form of a bar trolley with steered wheels. It is said to allow efficiency increases of up to 30% to be achieved in material transport to production plants.
“Many of our customers have already implemented forklift truck-free production supply via tugger or logistics trains,” explains Ralf Knaut, project manager special solutions at Linde Material Handling.
“This is because trains consisting of tow tractors and trailers are often superior to forklifts, especially in purely horizontal goods transport. They are loaded and unloaded from the side and therefore require less space than a forklift truck which is at right angles to the carriageway when setting a pallet down. In addition, the tugger trains can transport a larger amount of material to the assembly lines per journey. Both of these factors result in a lower volume of disruptive traffic, a lower risk of accidents and lower costs alongside higher productivity.
"However, existing factory layouts cannot always be adapted to the requirements of tugger train solutions without constraints,” Knaut points out.
In many existing plants, the source or destination are located at dead ends and are therefore not accessible for tugger trains that can only drive forwards with their trailers. This is where the Trolley Supply Truck comes into play as it can be used in reverse.
Four metres long, 1.28 metres wide and 2.36 metres high, the Trolley Supply Truck is extremely compact and requires a carriageway width of 1.88 metres, including a safety clearance of 30 centimetres. If the route includes curves, a 2.30-metre-wide carriageway is sufficient for the load transporter to turn at right angles. The electrically steered wheels at both the front and rear ensure great directional stability both on straight stretches and in bends. The U-shaped load support is designed for a wide variety of goods carriers. For example, two standard Euro pallets or one double Euro pallet as well as other goods carriers such as trolleys measuring between 800 and 1600 x 1200 millimetres can be transported.
The Trolley Supply Truck was presented as a prototype at the World of Material Handling customer event and feedback from customers was positive. As a result, test runs were undertaken in various plants and in Linde Material Handling’s own forklift assembly area. These confirmed the solution’s advantages: “In the first place, users remarked on the safety benefits compared to single vehicles, because the Trolley Supply Truck offers the operator excellent visibility to the front, rear and around the vehicle. Moreover, both the reduced traffic volume and lower accident risk were noticeable, as two pallets or trolleys can be transported simultaneously,” reports the Linde product manager. Altogether, this led to efficiency gains of up to 30%.