ARTICLE

Cantilever racking

12 December 2012

Pro-Dek Storage Systems was appointed to install a cantilever racking system for timber worktops for PWS Worksurfaces. The completed installation has 200 metres of racking 9.6 metres high in single-sided and double-si

Pro-Dek Storage Systems was appointed to install a cantilever racking system for timber worktops for PWS Worksurfaces.

The completed installation has 200 metres of racking 9.6 metres high in single-sided and double-sided runs.

With eight arms fitted throughout, some 1800 linear metres of storage have been provided. The arms are 900mm long and support loads up to 700kg. They can be adjusted vertically in increments of 100mm and have a pre-manufactured rake of 2 degrees.

Arm lengths and column spacings have been designed to accommodate a wide variety of worktop sizes from 1.5 to four metres long and 620mm to 960mm deep. All locations accept all product variations. A heavy-duty guide rail system bolted to the front face of the racking bases allows efficient operation of a large multidirectional sideloader.
 
OTHER ARTICLES IN THIS SECTION
FEATURED SUPPLIERS
TWITTER FEED