ARTICLE

Racking is Righton

12 December 2012

Three contracts totalling £500,000 completed by Pro- Dek Storage Systems have provided nearly seven miles of storage for a metal and plastics stockholder Following the completion of previous contracts, Pro-Dek was ap

Three contracts totalling £500,000 completed by Pro- Dek Storage Systems have provided nearly seven miles of storage for a metal and plastics stockholder

Following the completion of previous contracts, Pro-Dek was appointed to provide a variety of cantilever racking, shelving, mezzanine flooring and parts storage at new Righton premises near Manchester and Glasgow and an existing warehouse in Birmingham with a total floor area of 10,000 sq m.

Righton is a long-standing materials supplier for MoD projects, and these installations enable the company to stock the large quantities of materials and components required for the two 65,000- tonne Queen Elizabeth class aircraft carriers being built for the Royal Navy.

All three projects were completed in two phases, with cantilever and pallet racking installed in the first phases, followed by mezzanine floors and long-span shelving for storing components and fittings in phase two.

The cantilever racking is Pro-Dek's heavy-duty Pro-Bolt system up to seven metres high, and with arm lengths of 1000mm, 1250mm, 1500mm and 2100mm. Up to 13 storage levels were provided to allow for the wide variety of product to be stocked. Arms are adjustable in 150mm increments to allow for changes in product dimensions. At the customer's request Pro-Dek used some existing cantilever racking for these projects, following assessment for suitability and refurbishment as required, and also installed lateral beams in some locations to allow for pallet storage. The cantilever racking included both standard and narrow aisles. In the case of the narrow-aisle sections, floor-fixed guide rails were fitted to prevent damage.

Like the cantilever racking, the pallet racking was also provided with a variety of storage depths and entry widths to suit different product dimensions.

Mezzanine floors and heavy-duty shelving were installed by Pro-Dek at the three locations to provide storage for components, fittings and fasteners.

At Manchester the contract involved building partly over existing offices in order to maximise storage capacity.

Beneath the three mezzanines heavyduty long-span shelving, close-boarded with timber and rated at 800kg per shelf, was installed for large, heavy items, while on the upper levels smaller components and fittings are stored on mediumspecification shelving with galvanised steel mesh enclosures that form individual compartments for efficient stock control.
 
OTHER ARTICLES IN THIS SECTION
FEATURED SUPPLIERS
TWITTER FEED